Texas Instruments TAS5727 quick start Drc Gui

Using the EVM Software www.ti.com

Figure 11. Biquad GUI Window

A check mark selects the Biquad. If not selected, the Biquad is in ALL PASS Mode.

The frequency response and phase response plots for the current settings can be viewed and adjusted in the Frequency Response and Phase Response panes of the Biquad GUI as shown in Figure 11. The individual Biquad gains must be within ±12db.

Clicking the Apply & Draw button sends all three banks of coefficients to the Frequency Response and Phase response plots (providing auto bank is enabled).

3.5DRC GUI

The TAS5727 supports 1-band and 2-band DRC. Select one of the DRC modes from the Properties window. Then set the DRC threshold for each band by double-clicking the UPPERBAND or LOWERBAND block and adjusting the sliders as shown in Figure 12.

10	TAS5727 25W Digital Input Amplifier—with EQ and 2-Band DRC	SLOU299 –December 2010
		Submit Documentation Feedback

© 2010, Texas Instruments Incorporated