Texas Instruments TMS320C3x Table 91. Primary Bus Interface Signals

Memory Interface Signals
9-4
Table 9–1. Primary Bus Interface Signals
Signal Type†Description Value
After Reset Idle Status
STRB O/Z Primary interface access strobe 1 1
R/W O/Z Specifies memory read (active high) or write
(active low) mode 11
HOLD I Hold external memory interface NA‡Ignored
HOLDA O/Z Hold acknowledge for external memory interface 1 1
RDY I Indicates external primary interface is ready to
be accessed NA‡Ignored
A (23–0) O/Z Primary address bus. When the primary bus
address lines are not in high-impedance state
due to HOLD signal, they keep in the last exter-
nal primary bus access.
HI Address of last external
bus access
D (31–0) I/O/Z Primary data bus. These signals go to high-
impedance between write accesses. HIZ HIZ
†I Input
O Output
Z High impedance
‡NA means not affected.