To remove a trap receiver from the list of Trap IPs:
• Select “Remove IP address from the trap list”
• Select the IP to be removed and press [ENTER]
To view a list of trap receivers by IP address:
• Select “Print the current trap IP list”
• The interface will display the list of trap receivers. Press
[ENTER] to return to the menu.
To save any changes:
• Select “Save changes and exit”
To add a trap receiver’s IP address via the Web Management
Interface:
• Click on the “Management Control Processor” graphic.
• Click on the “SNMP” tab.
• Enter the IP address of the trap receiver.
• Click the “Add IP” button.
To remove a trap receiver’s IP address via the Web Management
Interface:
• Click on the “Management Control Processor” graphic.
• Click on the “SNMP” tab.
• Select the IP address of the trap receiver from the Trap IP list.
• Click the “Delete” button.
The network manager makes virtual connections to the RamSan,
which returns information to the manager regarding the device’s
status. The agent contains a database, known as the SNMP
Management Information Base (MIB), describing these application
parameters. The manager uses this database to make requests to
the agent and interpret the signals received. The MIB describes a
set of statistical and control values defined for hardware nodes on
the RamSan.
To download the RamSan’s MIB file via the Web Management
Interface:
Click on the “Management Control Processor” graphic.
Click on the “SNMP” tab.
Click the “Get MIB file” button.
RamSan-300/320/325 User’s Manual - 97 -