To change the administrator password via Text Management
Interface:
• From the Telnet Main Menu, select “Management setup”
• Select “Change password”
• Enter the admin password and press [ENTER]
If you are not logged in through the console, you must verify your
password. For security reasons, the system does not display the
typed letters when typing in passwords.
Figure 4-2: Password Change
The system allows the administrator to disable Telnet to prevent
users from accessing the system through Telnet.
The RamSan does not allow you to disable access to the console.
This provides a method to re-enable the Telnet, Web, and SNMP.
RamSan-300/320/325 User’s Manual - 22 -