6.4.2 Via Text Management Linking Fibre Channel Controllers
From the Telnet Main Menu, select “LUN Setup
Select “Link/unlink fibre channel controller(s) to/from
LUN(s)
Figure 6-8: Link LUNs Screen
The Link LUNs screen displays the currently selected controller and
port above the menu. Figure 6-8: Link LUNs Screen displays the
selected controller as 2-A, which is Controller 2 Port A.
To change the selected controller select “Select different
controller”. This displays a list of controllers. Select one and
press [ENTER].
To change the port, select “Select different channel on
controller”. This displays a list of channels. Select one and
press [ENTER].
In addition, the “Link/Unlink LUN(s)” screen indicates the number
of LUNs currently linked to the selected controller.
To link a LUN to the selected controller, select “Link LUN(s) to
selected controller”.
From the sub-menu that lists all LUN numbers not already
linked to another FC port, select a LUN number and press
[ENTER].
If all LUNs are already linked to ports, then the system displays an
error message.
Select “Exit to the LUN configuration menu
To save the changes once you have completed all LUN
configuration, select “Save changes and exit
To ensure that your changes were successful, see Section 6.3 -
Viewing LUN Status / LUN Map.
RamSan-300/320/325 User’s Manual - 73 -