You may connect to the management port with either a DB-9 serial cable or an RJ-45
Ethernet cable. The following settings apply to the serial port.
Port Settings
To connect to the RamSan using a serial port connection, use a dumb terminal or a
terminal emulation program such as Windows™ HyperTerminal. Set your baud rate
to 9600 with 8 data bits, 1 stop bit, no parity, and no flow control.
To connect to the serial port, use the DB-9 non-null serial cable supplied with the
system.
Default Account
Use the following default account information to access the RamSan through the
serial port:
ssd Login: admin
Pin Out
The RamSan serial port has the following pin out settings:
Figure D-0-1: Serial Port Pin Out
RamSan-300/320/325 User’s Manual - 112 -