4.5.2 Via Text Management

To add a new feature license via the Text Management Interface:
• From the Telnet Main Menu, select “Management setup”
• Select “Manage system licenses”
• Select “Add a feature license”
• Type or paste the license key into the input box and press
[ENTER]
If the system accepts the license key, the license manager screen
will display a message at the bottom of the screen stating “Added
feature: <feature name>.” If the system rejects the license key, it
will display a pop-up box stating, “Invalid license entered.”
You must logout and then log back into the text management
interface before you can configure any LUNs using the new feature.
Figure 4-11: Adding licenses using the Text Management Interface
4.6 Saving and Uploading Configuration Options
The RamSan allows the administrator to save the system settings,
including LUN configuration and Fibre Channel mapping, to ensure a rapid
and safe recovery in case of a critical component failure.

Important:

Configuration options are specific to a particular version of RamSan
firmware. You must save your configuration options each time you update
your firmware.
RamSan-300/320/325 User’s Manual - 36 -