CLEANING YOUR APPLIANCE
•Take hold of the top door trim at each side and position it to the inside edge of the glass.
•Push the trim down with its top edge over glass panel until the clip snaps in on each side of the trim.
•Open the door fully to access the hinges then rotate the ‘stirrups’ (see image below) until they lock into the hook. The oven do or may now be closed.
hook | stirrup |
CLEANING YOUR APPLIANCE
Removing side open door glass panel
WARNING
Rough handling, especially around the edges can cause the glass to break.
•Take hold of the black bordered glass panel with a hand on its upper and lower edge. Lift and rotate the glass around the retainer to remove it from the guide.
Cleaning door glass panels
WARNING
Do not to use harsh abrasives on the glass panes as the reflective surface plays a role in the function of
the oven.
Do not place glass in dishwasher. Hand wash only with a soft cloth and warm soapy water. When dry polish with a soft cloth and ensure the glass is dry before reassembly.
•Ensure the rubber moulding is on the upper corners of the smaller clear glass panel.
•Insert the smaller glass panel (when fitted) first from above and at an angle to the profile of the door.
•Push the middle of the trim down to ensure it is straight and firm against the glass panel.
Fitting the oven door
•Take hold of the oven door with a hand on each side and with the door at an angle of 45º, position the recesses at the bottom of the door onto the hinge arms of the oven. Let the door slide down the hinge arms as far as it will go.
hook stirrup
Side open door
Side open door models have been designed to allow for the inner glass panels to be removed for cleaning.
Removing side open door top trim
•Take hold of the grid embossed sections of the door trim at each end and press inwards to release the clips. Then remove the door trim by lifting it upwards.
•Take hold of the smaller clear glass panel (when fitted) with a hand on its upper and lower edge.
Lift the glass to remove it from the retainer.
•The rubber moulding on the upper corner of the small clear glass panel may be removed. Please take care that it is not misplaced.
•Repeat for the black bordered glass panel ensuring the painted surface is facing toward the outside of the door.
CLEANING | 32 | 33 | CLEANING |
|
|
|
|