2-hour “Auto Off” timer
The 2-hour timer features an automatic oven “cut off”. This means that a cooking period of up to 120 minutes can be set. When the timer has counted back to “Auto Off”
a bell will sound and the oven will automatically switch off. Once automatic baking is complete, return to manual operation by setting the timer to the ‘Off’ mark.
NOTE: It is not recommended to use this timer for short durations (e.g. boiling eggs).
Electronic Clock
Touch Control (POR667 and POR668 models only)
General features
Your touch control clock has the following features:
•Timer – allows you to set a countdown time that will beep when the set time has elapsed.
•Cooking duration – You can set a cooking duration. A timer will count down the preset cooking time, beep when the time has elapsed and turn the oven off.
•End cooking time – you can set a cooking finish time. A timer will count down the preset cooking time, beep when the finish time has been reached and turn the oven off.
•Delayed start cooking time – You can combine the cooking time and stop cooking time to switch the oven on and off at a specific time during the day.
Note: Your touch control clock only operates with your main oven.
Setting the time of day
You must set the time of day before you can operate your appliance. When power is supplied to your oven “12.00“ will be displayed and the “clock” indicator I will flash.
1.To set the time of day in hours and minutes, press – or +. 5 seconds after the last change, the “clock” indicator I will disappear, confirming the time has been set.
Note: The clock has a 24-hour display.
Change the time of day (Daylight saving)
1.Press “mode” until the “clock” indicator I begins flashing.
2.Press – or + to change the time. 5 seconds after the last change, the “clock” indicator I will disappear, confirming the time has been set.
Setting the timer
1.Press “mode“ until the “timer” indicator I begins flashing.
2.Set the countdown time you want by using – and +. 5 seconds after the last change the “timer” indicator I will stop flashing, confirming the timer has been set.
3.To stop the beeper, press –, + or “mode”.
Setting the cooking duration
1.Check the clock displays the correct time of day.
2.Select the desired oven function and temperature.
The oven indicator light will glow and the heating source will come on.
3.Press “mode“ until the “cook time” indicator I begins flashing.
4.Set the cooking duration you want by using – or +.
5 seconds after the last change, the “cook time” indicator I will stop flashing, and the time of day will be displayed.
Note: Do not forget to add preheating time if necessary.
Setting the cooking end time
1.Check the clock displays the correct time of day.
2.Select the desired oven function and temperature.
The oven indicator light will glow and the heating source will come on.
3.Press “mode“ until the “end time” indicator I begins flashing.
4.Enter the time of day you want to finish cooking
by pressing – or +. 5 seconds after the last change, the “end time” indicator I will stop flashing and the current time of day will be displayed.
Setting the delayed start cooking time
1.Program the “cook time“ and “end time“ as described in the relevant sections. Once both the “cook time“ and “end time“ have been set, the “cook time“ and “end time” indicators will stop flashing and the current time of day will be displayed.
To check or cancel settings
1.To check your settings, press “mode” until the setting you want is displayed. A red light will flash next to the mode (cook time, end time etc) that is currently on display.
2.To cancel “delayed start” press “mode” until a light flashes next to “cook time”. Press and hold “–” until the clock no longer reverses (“0:00” and you will hear a beep). If you have left the temperature and function knobs at a setting the oven will start once the “end time” light stops flashing.
3.To cancel “auto off” press “mode” until a light flashes next to “cook time”. Press and hold “–” until the clock no longer reverses (“0:00” and you will hear a beep). This automatically cancels “delayed start”. If you have left the temperature and function knobs at a setting, the oven will start once the “cook time” light stops flashing. Because you have cancelled “auto off” the oven will continue to heat until you manually turn it off.
On completion of cooking
The oven will turn off, the timer will beep and the “end time” and/or “cook time” indicators will flash.
1.Turn the function and temperature controls to the off position.
2.Press “+” or “–” or “mode” to stop the timer from beeping.
Touch Control
Setting the time of day
After the appliance has been electrically connected the “set clock” symbol 
and “timer arrow 
will flash on the clock display.
1.To set the time of day in hours and minutes press the
– or +. 5 seconds after the last change the “timer arrow”
will disappear, confirming the time has been set. NOTE: The clock has a 24-hour display.
Change the time of day (Daylight saving)
1.Switch off the appliance by pressing “On / Off”.
2.Press “Timer” as many times as necessary until the “set clock” symbol 
and “timer arrow 
flash on the clock display.
3.Press “+” or “–” to change the time. 5 seconds after the last change the “set clock” symbol 
and “timer arrow 
will disappear, confirming the time has been set.
Setting the oven function
1.Switch on the appliance by pressing the “On / Off”.
The oven lights will light.
2.Press the “Function” as many times as necessary until the desired function appears. The suggested cooking temperature appears in the display and the degrees symbol “°” flashes. If the suggested temperature is not changed within approximately 5 seconds the degrees symbol “°” stops flashing and the oven begins to heat.
The suggested temperature display is replaced with the oven centre temperature and a thermometer icon. The thermometer icon rises slowly, indicating the degree to which the oven is currently being heated.
Changing the oven temperature
1.Press the – or +, to decrease or increase the temperature.
NOTE: The temperature can only be adjusted when the degrees symbol “°” is flashing. The temperature setting changes in increments of 5°C. To change the temperature after the degrees symbol “°” stops flashing, press the “Function” and then press the – or + to change the temperature.
