Thermo Products CHB1-50N, CHB1-125N, CHB1-75N, CHB1-100N II.FURNACE SPECIFICATIONS CHB1 SERIES

All installations and services must be performed by qualified service personnel.

II.FURNACE SPECIFICATIONS CHB1 SERIES

MODEL NO.	CHB1-50		CHB1-75		CHB1-100		CHB1-125
BTU/HR INPUT	50,000		75,000		100,000		125,000
BTU/HR OUTPUT	47,000		72,000		94,000		116,000
HT. OF CASING	44-1/4”		44-1/4”		44-1/4”		44-1/4”
WIDTH OF CASING	17”		17”		21”		24”
DEPTH OF CASING	27-1/2”		27-1/2”		27-1/2”		27-1/2”
WARM AIR OUTLET	15 x 18		15 x 18		19 x 18		22 x 18
RETURN AIR INLET	25 x 16		25 x 16		25 x 16		25 x 16
DIA. OF FLUE	2”		2”		3”		3”
DIA. OF COMBUSTION	2”		2”		3”		3”
AIR INTAKE
CFM @ .2” & .5” w.c.	.2”	.5”	.2”	.5”	.2”	.5”	.2”	.5”
EXTERNAL STATIC PRESSURE
@HI SPEED	1100	860	1600	1380	1940	1700	2770	2060
@MH SPEED	1000	720	1250	1150	1720	1540	1800	1700
@ML SPEED	--	--	1030	930	1530	1380	1730	1600
@LO SPEED	610	420	820	700	1340	1220	1670	1550
TEMPERATURE RISE	70		70		70		70
BLOWER MOTOR HP	.20		.41		.50		.75
NO. OF SPEEDS	3		4			4		4
RUN CAPACITOR	10 mfd		10 mfd		10 mfd		10 mfd
LARGEST RECOMMEDED	2 Ton		3.5 Ton		4 Ton		5 Ton
AIR CONDITIONER
SIZE OF FILTERS	24-3/4” x 15-3/4”		24-3/4” x 15-3/4”		24-3/4” x 15-3/4”		24-3/4” x 19-3/4”

NOTES:

1.BTU output based on annual fuel utilization efficiency rated by manufacturer.

2.On all outlet and inlet dimensions, the first dimension is width.

3.To permit largest recommended air conditioning (at .5 static pressure), selection of the highest motor speed is required.

1