Thermos The Big Easy Quickset Traditional LP Gas Grill manual Ignitor Lighting Big Easy

To match light use first opening on burner

Ignitor Lighting Big Easy

▲Do not lean over grill while lighting.

1.Open lid. Turn on gas at LP tank. Rotisserie grills only: Push in and turn Burner Selector Knob to ON MAIN BURNERS.

2.Turn LEFT knob to HI.

3. Push IGNITOR Button	rapidly, or	hold, turn Ignitor Knob	(up to 5
times) to light. Be sure burner lights and stays lit.

4.If burner does not light turn knob(s) to OFF, wait 5 minutes, try again.

Two Burners:

5.Turn RIGHT knob to HI to light second burner.

Three Burners:

5.Turn CENTER knob to HI and then RIGHT knob to HI.

6.If IGNITOR does not work, follow match lighting instructions.

After Lighting: Turn knob(s) to HI position for warm-up.

Match Lighting Big Easy

▲Do not lean over grill while lighting.

	1. Open lid. Turn on gas at LP tank.
	Rotisserie grills only: Push in and turn Burner Selector Knob to ON MAIN
	BURNERS.
	2. Attach match to Match holder, light match
	3. Push in and turn LEFT knob to HI. Be sure burner lights and stays lit.
Two Burners:
4.	Turn RIGHT knob to	HI to light second burner.
Three Burners:			Left Side of Grill
4.	Turn CENTER knob to	HI and then

RIGHT knob to HI.

Match lighting hole

Rotisserie Burner Ignitor Lighting

1.Turn all knobs to OFF.

2.Open lid during lighting. Turn gas on at LP tank.

3.Push in and turn Burner Selector Knob to ON ROTISSERIE BURNER.

4.	Press Ignitor Button			or Electronic Ignitor button	hold up to 4 seconds. Or turn
	Ignitor Knob		rapidly (up to 5 times). Be sure burner lights and stays lit.
5.	If IGNITOR does not work, follow match lighting instructions above.
	Match Lighting
	1.	Open lid. Turn on gas at LP tank.
	2.	Place lit match near porthole of burner.
	3.	Push in and turn Burner Selector Knob to ON ROTISSERIE
		BURNER. Be sure burner lights and stays lit.

Note: Rotisserie burner and main burner cannot be used at the same time

12