Troubleshooting - Electronic Ignition System
Problem | Possible Cause | Check Procedure | Solution | |
|
|
|
| |
|
|
|
| |
No sparks | Battery not installed | Check battery | Install battery (make sure | |
appear at any | properly. | orientation. | that "+" and | |
electrodes |
|
| are oriented correctly, with | |
when | ignition |
|
| "+" end down and |
button | is |
|
| up.) |
pushed; no |
|
|
| |
noise can be | Dead battery. | Has battery been | Replace battery with new | |
heard from |
| used previously? | ||
spark module. | Button assembly not | Check to insure | Unscrew button cap | |
|
| |||
|
| installed properly. | threads are properly | assembly and reinstall, |
|
|
| engaged. Button | making sure threads are |
|
|
| should travel up and | aligned and engaged fully. |
|
|
| down without |
|
|
|
| binding. |
|
|
| Faulty spark | If no sparks are | Replace spark module |
|
| module. | generated with new | assembly. |
|
|
| battery and good |
|
|
|
| wire connections, |
|
|
|
| module is faulty. |
|
No sparks | Output lead | Are output | Remove and reconnect all | |
appear at any | connections not | connections on and | output connections at | |
electrodes | complete. | tight? | module and electrodes. | |
when | ignition |
|
|
|
switch is pushed; noise can be heard from spark module.
Storing Your Grill
•Clean cooking grate(s) and discard old briquets.
•Store in dry location.
•When LP tank is connected to grill, store outdoors in
•Cover grill if stored outdoors. Choose from a variety of grill covers offered by
•Store grill indoors ONLY if LP tank is turned off and disconnected, removed from grill and storedoutdoors.
•When removing grill from storage follow "Cleaning Burner Assembly" instructions before startinggrill.
30