Theta Digital LC3015-2 manual Chiller

The Chiller

The chiller is very important to the reliable operation of your laser cutting machine.

￿The chiller must be placed so that an adequate flow of air is maintained.

￿The positioning of the chiller is flexible. Two lengths of flexible hose and appropriate fittings are provided for connection to the system.

￿If you plan to hard plumb the system, use only Brass, Stainless Steel, and/or Plastic. Black steel or Galvanized pipe and fittings are not permitted.

If the system is hard-plumbed, the total restriction of piping and fittings must not add up to more restriction than the standard flexible hose and fittings would have.

￿The chiller is a closed loop system, but requires periodic addition of water and/or additives to re- place evaporative losses.

￿The chiller must be filled with proper coolant mixture. See page 7 for details.

DO NOT FILL THE CHILLER WITH CITY WATER, OTHERWISE SERIOUS AND EXPENSIVE DAMAGE MAY BE INFLICTED ON THE LASER OSCILLATOR

16 LC3015 Theta User Installation Guide - October, 2003