Planning The Location of the Machine

The diagrams following provide the details for positioning your new machine.

￿No obstacles are allowed in the table travel area, and the machine must be at least 3 feet from any wall or obstruction, and the ceiling must be at least 40" above the top of the machine.

￿The machine must be placed on a single continuous foundation (see Machine Foundations section).

￿In addition to the maintenance areas recommended, ensure that

(1)the doors of the NC and Laser cabinets are unobstructed,

(2)the chiller airflow is unobstructed, and

(3)the NC unit is protected from direct sunlight.

￿The positioning of the chiller and dust collector are flexible. Please see those sections for details.

LC3015 Theta User Installation Guide - October, 2003

15

Page 23
Image 23
Theta Digital LC3015-2 manual Planning The Location of the Machine