Dust Collectors
The dust collector is very important to the safe operation of your laser cutting machine. It will collect dust and particulate generated by the laser cutting process.
More than one dust collector type is available for the machine. Either unit, in standard con- figuration, is suitable for cutting most metallic materials. Neither one is suitable for cutting
The positioning of the dust collector is flexible. The dust collector is connected with twenty feet of flexible hose and ap- propriate fittings.
Torit DFT3-18
Drawings of this unit are on this and the following page(s).
See page 7 for compressed air require- ments.
Figure 5: Torit DFT3-18, front side
18 | LC3015 Theta User Installation Guide - October, 2003 |
