Tiger Products Co., Ltd 7X30 Maintenance Greaseless Bearings on the Boom, Greasing Boom Cylinders

MAINTENANCE

GREASELESS BEARINGS ON THE BOOM

The pivot points on the boom have greaseless bearings. Check the guide on the last page for greasing points.

NOTE: The new greaseless bearing is blackish/gray in color and should not be greased.

GREASING BOOM CYLINDERS

Locate the zerk on the butt end tang and on rod end tang of the main and secondary boom cylinder. Inject Lithium-Complex Extreme Pressure grease conforming to NLGI2-ISO 320 specifications until grease begins to protrude from ends. This procedure is to be performed daily or at 8 hour intervals.

GREASING SPINDLE

Locate grease fitting on inside of deck housing. Inject Tiger Spindle Lubricant, part number 06540000 into spindle housing. Fill with lubricant until lubricant weeps out of top spindle seal. Lubricate spindle at end of day while mower is still warm.

GREASING DECK ROTATION LINKAGE

Locate grease zerks on linkages. Inject Lithium-Complex Extreme Pressure grease conforming to NLGI2-ISO 320 specifications.. Fill with lubricant until lubricant weeps out of pin locations. Lubricate daily.

JD 7X30 COUGAR ROT Maintenance Section 4-15