OPERATION

63” BOOM FLAIL

The 63” boom flail mower was designed for cutting grass. The cutter shaft speed must be maintained for proper cutting. To insure that the cutter shaft is rotating at maximun speed, run tractor at full throttle during mowing operations. If cutter shaft slows to the point that the knives are folding back against the cutter shaft, move the mower head away from the foliage and allow the cutter shaft to regain full speed.

Operating the mower in a manner that allows the knives to contact

the drum will cause permanent damage to the cutter shaft drum, knives, and knife attachment parts.

The 63” boom flail cutter shaft is designed for standard rotation (same rotation as the tractor wheels during forward travel). Never operate the cutter shaft in reverse rotation. Operating this mower in reverse rotation may cause objects to be thrown out the front of the mower head.

UNSTOWING BOOM

To un-stow the boom from the boom rest, proceed as follows. Extend the

secondary boom “OUT” and lift the head off of the boom rest. Extend the knuckle boom “STRAIGHT”. Move main boom “UP” off of main boom support. Swivel boom “FORWARD” perpendicular to tractor and switch travel lock to “OFF”. The head and booms are now ready for full operation.

TRANSPORTING MOWER

Transporting under the units own power:

NOTE: ONLY when transporting under the units own power is it permissible to rest the head in any of the resting positions. When transporting on a trailer the head MUST be resting on the position designed for the head you are using.

When transporting between job sites, the following procedure should be followed: Shut off the power to the cutting head and allow all motion to come to a complete stop. Roll the mower deck “OUT” all the way until it is adjacent to the secondary boom. Extend the secondary boom “OUT” to clear the boom rest. Next, swivel the boom “AFT” and manuver the main boom until it rests on the boom rest. Switch over to the knuckle control and curl the knuckle “Back”. Slowly and carefully lower the secondary boom until it contacts the desired cradle. Lastly, place the “Travel Lock” switch on the main control switch box to the “ON” position. The unit is now ready for self transportation. (See picture of stowed boom on next page).

Operation Section 3-14

Page 78
Image 78
Tiger Products Co., Ltd CNH T6010-80 manual Operation Boom Flail, Unstowing Boom

CNH T6010-80 specifications

Tiger Products Co., Ltd has been a prominent player in the construction and engineering equipment sector, and one of their noteworthy offerings is the CNH T6010-80. This product stands out owing to its engineering precision, robust performance, and user-centric design.

The CNH T6010-80 is equipped with a powerful engine that ensures robust performance in various working conditions, making it an ideal choice for contractors and construction professionals. With an output of 80 horsepower, it delivers the right balance of power and efficiency. This makes it suitable for a range of applications, from earthmoving to material handling.

One of the main features of the T6010-80 is its advanced hydraulic system, which provides exceptional lifting capabilities and ensures smooth operation. The integrated hydraulic technology enhances productivity, allowing operators to perform tasks with higher precision and speed. This system also contributes to the machine's versatility, enabling rapid switching between different attachments, which is crucial for dynamic job sites.

The cabin of the T6010-80 is designed with operator comfort in mind. It boasts an ergonomic layout, offering easy access to controls and a spacious environment that reduces fatigue over long working hours. Ensuring occupant safety, the cabin is reinforced, and the visibility from the operator's seat is optimized, allowing for better situational awareness.

Another characteristic worth mentioning is the robust construction of the T6010-80. Built with high-quality materials, it is designed to withstand harsh working conditions. The durability of the machine contributes to a longer lifespan, reducing maintenance costs and increasing return on investment.

Furthermore, Tiger Products Co., Ltd has integrated modern technology into the T6010-80, including features such as GPS and telematics systems. These technologies allow for real-time monitoring of the machine's performance and location, facilitating better fleet management and operational efficiency.

In conclusion, the CNH T6010-80 from Tiger Products Co., Ltd is a powerful, efficient, and versatile machine, ideal for various construction tasks. With its emphasis on performance, operator comfort, and advanced technologies, it exemplifies the brand's commitment to providing reliable and innovative solutions in the engineering equipment industry. Whether for small-scale projects or larger construction undertakings, the T6010-80 delivers the performance professionals need to excel in their work.