TOA Electronics H-1 Installation, Direct Wall/Ceiling Mounting Without Using an Electrical Box

6. INSTALLATION

6.1. Direct Wall/Ceiling Mounting Without Using an Electrical Box

Step 1. Adapter Panel mounting

1-1. Using the supplied hole pattern sheet as a guide, make an opening of the specified size in the wall or ceiling panel.

Note

The thickness of the suitable wall or ceiling panel is 9 to 30 mm.

1-2. Loosen the two board clamp screws.

Board clamp

1-3. Place the Adapter Panel inside the opening, and set the panel to the desired position using the positioning tabs.

Adapter Panel

Positioning tab

5