TOA Electronics H-1 Nomenclature, Side Panel, Front Panel, Rear Panel, Accessory Adapter Panel

Models: H-1

1 12

Page 4

H-1 speaker

Grille

[Side Panel]

	For mounting to the Adapter Panel
[Rear Panel]	Mounting bracket
	For mounting to an electrical box

Image 4

Contents

TABLE OF CONTENTS OPERATING INSTRUCTIONSSPEAKER SYSTEMH-1 TOA Corporation1. SAFETY PRECAUTIONS Safety Symbol and Message ConventionsWhen Installing the Unit When the Unit is in Use4. HANDLING PRECAUTIONS 3. FEATURES2. GENERAL DESCRIPTION Accessory Adapter Panel 5. NOMENCLATURESide Panel Front Panel6.1. Direct Wall/Ceiling Mounting Without Using an Electrical Box 6. INSTALLATIONStep 1. Adapter Panel mounting Step 2. Wiring and impedance changes Step 3. Mounting the speaker and Trim Piece connector to select the desired impedance. Preset tospeaker socket Adapter Panel mounting tabs, then mount theAdapter Panel the angle, retighten the screwsMemo 6.4. Removing the Trim Piece 6.3. Mounting the Speaker Directly to an Electrical BoxMemo 7. REPAINTING THE GRILLE AND TRIM PIECE Follow the procedures below to change the color of the2. Detach either of the two mounting brackets attached to the speaker 5. Paint both the grille and Trim Piece9. EQUALIZATION 8. PROTECTION CIRCUITRY INFORMATIONImportant Note Accessories 10. SPECIFICATIONSTOA Corporation