TOA Electronics H-1 Repainting The Grille And Trim Piece, Paint both the grille and Trim Piece

7. REPAINTING THE GRILLE AND TRIM PIECE

Follow the procedures below to change the color of the

grille.

1.Remove the speaker's angle adjustment screw (1 piece).

2.Detach either of the two mounting brackets attached to the speaker.

Mounting bracket

Angle adjustment screw

Grille mounting screw

3.Remove the two grille mounting screws from the back of the speaker.

4.Slide the grille off the speaker.

5. Paint both the grille and Trim Piece. Grille

5-1. Wipe dirt off the grille and Trim Piece with a soft cloth

moistened with a detergent before painting. Do not use volatile liquids such as thinner.

5-2. Uniformly spray a thin coating of paint over the grille and Trim Piece changing the spraying positions gradually.

Notes

•Do not use a roller or brush to paint because the meshes of the grille could be clogged with paint.

•Use paint that is appropriate for the composition of the grille and Trim Piece.

Grille: Rolled steel plate

Trim Piece: Fire-resistant ABS resin

• Follow the instructions on the paint when painting.

5-3. After the paint dries, repeat Step 5-2 once or twice to repaint.

Notes

•Be sure to repeat Step 5-2 at least twice.

•When repainting the front grille, place the grille upside down so that the surface is painted uniformly.

6.After the paint has dried, remount the grille to the speaker.

10