Topcom 2450 manual Selecting a base unit, Automatic selection, Manual selection

HANDL. B2450_scan.qxd 03-09-2002 17:05 Page 149

Butler 2450

Caution: You can only cancel subscription of another handset, not the handset you are using to do the

cancellation procedure.

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘REMOVE HS’ appears on the display.

•Press the Programming key .

•‘PIN’ appears on the display.

•Enter your 4-digit PIN code in (default PIN code is ‘0000’). Use the number keypad.

•Press the Programming key .

•‘REMOVE HS’ appears on the display.

•Dial the number of the handset you want to remove (1 –5). Use the number keypad.

•Press the Programming key .

•‘REMOVE HS’ appears on the display and the handset is removed

•NOT SUB’ appears on the handset removed.

4.28 Selecting a base unit

If your handset is subscribed to several base unit stations (max. 4) , you must select a base unit because the handset can only communicate with one base unit at a time. There are two possibilities:

4.28.1 Automatic selection

If you set the handset to ‘automatic selection’, the handset will automatically choose the closest base unit in standby.

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘BASE SEL’ appears on the display.

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘AUTO’ appears on the display.

•Press the Programming key .

•‘SEARCHING’ and the symbol appear on the display.

•A signal sounds once the handset has found a base unit.

4.28.2 Manual selection

If you set the handset to ‘manual selection’, the handset will only choose the base unit you have set.

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘BASE SEL’ appears on the display.

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘MANUAL’ appears on the display.

•Press the Programming key .

•‘BASE -‘ appears on the display.

•Enter the number of the base unit you want to select (1-4). Use the number keypad.

•Press the Programming key .

ENGLISH

149