Topcom 2450 manual Base Key Functions, Outgoing Messages, Recording outgoing messages OGM 1 or OGM

HANDL. B2450_scan.qxd 03-09-2002 17:05 Page 155

Butler 2450

7.2 Base Key Functions

Note: - The & keys are at the bottom of the base

	Key		Stand-by mode		During message
			Press key briefly	press key for 2 seconds	play-back
	1	1,2	Play OGM	Record OGM	Go to previous message
2			Playback messages	None	Pause
3			None	Record memo	Skip message
			Set volume	None	Set volume
4			speech +ringing
5			Select OGM	Switch On-Off	Stop
6			Play VIP-code	Set VIP-code	None
7			Current number of	Set numbers of	None
			ring tones	ring tones
8			Playback Time	Set date/time	None
9			None	Delete all messages	Delete message or
					delete OGM

7.3 Outgoing Messages

Two outgoing messages of 2 minutes can be recorded (OGM1 and OGM2).

•Outgoing message 1 for the answering function and possibility for callers to leave a message.

•Outgoing message 2 for the answering function without allowing callers to leave a messages on the machine.

7.3.1Recording outgoing messages (OGM 1 or OGM 2)

• Press the -key to select the OGM.

• A voice will playback the recorded OGM

• Press the 1,2 -key for two seconds

• Record the outgoing message after the beep

• Press the Stop -key to stop recording.

Note: The recording cannot exceed 2 minutes. If no outgoing message is recorded, the prerecorded

outgoing message is used.

7.3.2Playback the Outgoing Message To check the outgoing message now set:

• Press the 1,2 key.

Note: To stop playing the welcome note briefly press the Stop -key .

ENGLISH

155