HANDL. B2450_scan.qxd
Butler 2450
8 TROUBLE SHOOTING
Symptom | Possible cause | Solution | |
No display | Batteries uncharged | Check the position of the | |
|
|
| batteries |
|
|
| Recharge the batteries |
|
| Handset turned OFF | Turn ON the handset |
No tone | Telephone cord badly | Check the telephone | |
|
| connected | cord connection |
|
| The line is occupied | Wait until the other handset |
|
| by another handset | hangs up |
The icon | Handset out of range | Bring the handset closer to | |
| flashes |
| the base |
|
| ||
|
| The base has no power | Check the mains connection |
|
| supply | to the base |
|
| The handset is not | Register the handset to the |
|
| registered to the base | base |
Base or handset | The ringing volume is | Adjust the ringing volume | |
do not ring | zero or low |
| |
Tone is good, but | The dialling mode is | Adjust the dialling mode | |
there is no | wrong | (pulse/tone) | |
communication |
|
| |
Telephone does not | Manipulation error | Remove the batteries and | |
react to pressing |
| but them back in place | |
the keys |
|
| |
|
| Keypad lock ON | Turn OFF the Keypad Lock |
Flash (R) Key does | Wrong Flash time | Change the flash time | |
not work |
|
| |
ENGLISH
161
