Topcom Babytalker 2500

3.2 Baby unit (Illustrations C and D)

16. Night Light button

23. Volume down button

17. On/Off button

24. Volume up button

18. Paging button

25. Night Light

19. Power LED

26. Hang handle

20. Play button

27. Battery cover screw

21. Melody button

28. Battery cover

22. Microphone

29. Power adapter connector

4Getting started

4.1Baby unit battery Installation

The baby unit can be used either with 3 AA - Size batteries (alkaline batteries recommended) or the household AC current. The baby unit has no charging function!

It is recommended to add the batteries. It will automatic backup when there is a main power interruption.

90° MAX

-

1 x AA

+

AA x 1

 

 

A

 

xA

-

1

 

+

-

+

1.Turn the screw 90° of the battery cover (27) on the backside of the baby unit in a counter clockwise direction using a screw driver. Remove the battery cover (28). Do not try to rotate the screw further than the position ‘open’.

2.Install 3 AA alkaline batteries following the polarity as shown.

3.Close the battery compartment.

4.Press (17). The power LED (19) will illuminate.

5.Press and hold (17) to switch off the baby unit.

When the battery level is low, the power LED (19) will blink.

Do not mix old batteries with new ones. Keep batteries away from small children Do not short-circuit & dispose of in fire.

Remove the batteries if this device is not going to be used for a long period.

4

Topcom Babytalker 2500

Page 4
Image 4
Topcom 2500 manual do utilizador Getting started, Baby unit Illustrations C and D, Baby unit battery Installation