
Butler 5070
-Press OK to confirm.
-Select CHANGE PIN by using the UP- and DOWN keys.
-Press OK to confirm.
-Enter the old Pin code: OLD PIN:
-Press OK to confirm.
-Enter the new Pin code: NEW PIN:
-Press OK to confirm.
-
-Press OK to confirm.
-Press ESC to leave the menu.
7.9.Handset Reset The standard settings are:
Display language: | English |
Handset Pin: | 0000 |
Redial List: | Empty |
Call List: | Empty |
Baby Call: | Off |
Battery low alert: | On |
Key Click: | On |
Out Of Range signal: | On |
Direct memories: | Empty |
Knocking Tone : | On |
To reset the handset to its standard settings:
-Press MENU when the unit is in standby mode..
-Select SECURITY HS by using the UP- and DOWN keys.
-Press OK to confirm.
-Select RESET by using the UP- and DOWN keys.
-Press OK to confirm.
-The display shows SURE?
-Press OK to confirm or ESC to leave the setting.
7.10. Subscribing a handset on a base station
Every new handset must be subscribed onto the base station before you can make a phone call.The included handset is already subscribed.
If you want to subscribe a new handset on the bases station or when you have unregistered the hand- set, the base set must be set in subscription mode.
You will need the PARK CODE. This is the 15 digit code, which you can find at the bottom of the base station.
-Press the
-Press MENU when the unit is in standby mode..
-Select SYSTEM by using the UP- and DOWN keys.
-Press OK to confirm.
-Select SUBSCRIPTION by using the UP- and DOWN keys.
-Press OK to confirm.
-Press OPT. (option)
-Select NEW by using the UP- and DOWN keys.
-Press OK to confirm.
ENGLISH
81