Butler 5070

-Press OK to confirm.

-Press OPT.

-Select EDIT OR DELETE by using the UP- and DOWN keys.

-Press OK to confirm.

-Edit the selected telephone number by means of the numerical keypad (press C to erase a digit) or confirm Sure? to delete

-Press OK to confirm.

-Press ESC to leave the setting.

8.6.4.Activating/deactivating the incoming call filter To activate/deactivate the incoming call filter

- Press MENU when the unit is in standby mode..

- Select BASE SETTING by using the UP- and DOWN keys. - Press OK to confirm

- Enter the Base Pin code BS_PIN?: - Press OK to confirm.

- Select CALL FILTER by using the UP- and DOWN keys. - Press OK to confirm.

- Select F_ACTIVE by using the UP- and DOWN keys.

- Press OK to switch over activate (V appears on the display)/deactivate. - Press ESC to leave the setting.

8.7.Base set Security:

8.7.1.Change Base PIN Code The standard Pin code is 0000

To change the Pin code:

-Press MENU when the unit is in standby mode..

-Select BASE SETTING by using the UP- and DOWN keys.

-Press OK to confirm

-Enter the Base Pin code BS_PIN?:

-Select SECURITY by using the UP- and DOWN keys.

-Press OK to confirm.

-Select CHANGE PIN by using the UP- and DOWN keys.

-Press OK to confirm.

-Enter the new Pin code: NEW PIN:

-Press OK to confirm.

-Re-enter the new Pin code: NEW PIN:

-Press OK to confirm.

-Press ESC to leave the menu.

8.7.2. Emergency numbers

The telephone contains a list 3 emergency phone numbers. 110 and 112 are already preprogrammed in the telephone. A third number can be entered.

These numbers can always be dialed, also when the keypad is locked or restriction is programmed.

To enter the 3 the emergency number:

-Press MENU when the unit is in standby mode..

-Select BASE SETTING by using the UP- and DOWN keys.

-Press OK to confirm

-Enter the Base Pin code BS_PIN?:

-Press OK to confirm.

88

Page 88
Image 88
Topcom 5070 manual Base set Security, Change Base PIN Code The standard Pin code is, Emergency numbers