Butler 5070
-Select SECURITY by using the UP- and DOWN keys.
-Press OK to confirm.
-Select EMERGENCY by using the UP- and DOWN keys.
-Press OK to confirm.
-Select the 3e number by using the UP- and DOWN keys.
-Select EDIT
-Edit or enter the telephone number by means of the numerical keypad (press C to erase a digit)
-Press OK to confirm.
-Press ESC to leave the menu.
8.8.External call On/Off
When you transfer an external call to another external number you will have to pay the call cost until the end of the call between both external parties, therefor it is possible to
-Press MENU when the unit is in standby mode..
-Select BASE SETTING by using the UP- and DOWN keys.
-Press OK to confirm
-Enter the Base Pin code BS_PIN?:
-Press OK to confirm.
-Select PREFIX/ECT by using the UP- and DOWN keys.
-Press OK to confirm.
-Select ECT by using the UP- and DOWN keys.
-Press OK to switch between activate (✔ appears on the display)/deactivate ( - ).
-Press ESC to leave the setting.
8.9.Reset Base The default settings are: Subscribed handsets: 0 (none) Display language : English
Base Pin: | 0000 |
Emergency numbers: | |
MSN list: | Empty |
Call restriction: | Off |
Call filter: | Off |
Prefix: | National 0, International 00 |
Call transfer: | ECT (external via network) active |
To reset the base to its standard settings:
-Press MENU when the unit is in standby mode..
-Select BASE SETTING by using the UP- and DOWN keys.
-Press OK to confirm
-Enter the Base Pin code BS_PIN?:
-Press OK to confirm.
-Select DEFAULT SET. by using the UP- and DOWN keys.
-Press OK to confirm.
-The display shows SURE?
-Press OK to confirm or ESC to leave the setting.
8.10. Calling Charge information.
This function only works if your ISDN network supports AOC (advice of charge) or your PBX supports the described service. The charge is expressed in units or in currency depending on the ISDN network.
ENGLISH
89
