49
CONTENTS
1 Handset and Basestation 50
2 Display 50
3 Operating Instructions 51
3.1 Installation 51
3.2 Basic Functions 52
3.2.1 Incoming Calls 52
3.2.2 Outgoing Calls 52
3.2.3 Paging from Base to Handset (up to 6 handsets) 53
3.2.4 Internal Call to another Handset 53
3.2.5 Internal Call from another Handset 54
3.2.6 Internal Call during an external Call 54
3.2.7 Incoming external Call during internal Call 55
3.2.8 Making a Phone Call 56
3.2.8.1 Normal Dialling 56
3.2.8.2 Last Number Redial 56
3.2.8.3 Memory Numbers 56
3.2.9 Prenumeration 57
3.2.9.1 Normal numeration 57
3.2.9.2 Redialling (4 last numbers) 57
3.2.9.3 Memory numbers 57
3.2.10 Microphone Mute 58
3.2.11 Dialling Mode 58
3.2.12 Flash (R) 58
3.2.13 Call Duration Time 59
3.2.14 Caller-ID Information 59
3.2.15 Temporary Keypad Lock 59
3.3 Programming the System Parameters 60
3.3.1 Ring Volume and Ring Melody of the Base Station 60
3.3.2 Pause Time Programming 60
3.3.3 PSIC/EIC Code Programming 61
3.3.4 Emergency Numbers 61
3.3.5 Call Barring 62
3.4 Programming the Handset Parameters 63
3.4.1 Base Number Display on/off 63
3.4.2 Handset Number Display on/off 63
3.4.3 Key Tone on/off 63
3.4.4 Ring Volume and Melody of the Handset 64
3.4.5 Speaker Volume Programming 64
3.4.6 Notebook Function 64
3.4.7 Programming Memory Numbers 65
3.4.8 Transfer Redial Memory Numbers to Memory Locations 65
3.4.9 Clear the Dial Memory 66
3.4.10 Babycall 66
3.5 Programming the PIN code (Personal Identification Number) 67
3.5.1 Programming the Handset PIN code 67
3.5.2 Programming the Base PIN code 67
3.6 Registration and Deregistration 68
3.6.1 Registration 68
3.6.2 Deregistration 68
3.7 Select the Base Station 69
3.8 Default Settings 69
3.8.1 Default Settings of the Handset 69
3.8.2 Default Setting of the Base Station 70
4Technical Data 70
5Troubleshooting 71
6Warranty 72