69
P ress the ‘ b u t t o n .
3.7 SELECT THE BASE STATION
This pro c e d u re will select the base station and will make a connection.
P ress the buttons ‘ ’and ‘I N T’ .
On the display appear the base
numbers of the base stations to which
the handset is re g i s t e red. The base
number of the currently selected base
b l i n k s .
Select the base number of the base
station you want (for ex.) Press ‘2’.
The selected base number blinks.
R E M A R K S
Selecting ‘0’: the handset will search all base stations to which it is re g i s t e red and
s y n c h ronizes them to the base station that was found first.
Selecting others: The Handset will search only the defined base station.
P ress the‘ b u t t o n .
The handset will now search only base
number 2.
3.8 DEFAULT SETTINGS
3.8.1 Default Settings of the Handset
This procedure will reset all the parameters to default values and will erase all
registered base stations.
Switch off the handset (press and hold the ‘ ’ button for about 1 sec. at
standby mode).
Press the buttons ‘*’ and ‘#’ simultaneously and switch on the handset (press
the ‘ ’ button). The default values of the handset have now been reset.
Default Parameter Values
Ringer Pattern 4
Ringer Volume 2 (middle)
Speaker Volume 2 (middle)
Key Tone ON
Lock Mode OFF
Memory numbers ERASED
Redial memory ERASED
Babycall memory ERASED
Base Number Display ON
INT
1 1 2 3 4 0 1 3 4