71
5 Troubleshooting

SYMPTOM SOLUTION

The SCAN indicator is not • Check the battery of the handset.
visible on the display. • Place the handset on the base to charge
the handset battery.
• Remove the handset battery, put it back in
and switch on the handset.
Battery is not charged. • Check the battery of the handset.
•Clean the charge terminal of the handset and
the base station.
BATTERY indicator is blinking • Charge the handset battery.
and you hear a warning tone.
Out-of-range warning tone is •The handset is out of radio coverage, you
generated. must enter within radio coverage.
Handset can not find the base •When the handset is out of radio coverage,
station (the SCAN indicator blinks) you must enter within radio coverage.
• Check the adapter of the base.
•P rogram the default values of the base station.
• Register the handset correctly to the base
station.
• Remove the handset battery, put it back in
and switch on the handset.
•Disconnect the adapter from the base and
connect it again.
No dial tone • Check if the telephone line is connected
correctly to the base.
It is not possible to dial a number. • Select the correct dialling system
(DTMF or PULSE).
The handset doesn't ring. • Program the ringer volume again.
When dialling an external • Check if the lock mode is activated, if so
telephone number, the deactivate it.
connection is broken.
There is no key tone. • Activate the key tone function.