70
Handset Number Display ON
Default Base station Automatic Searching mode (‘-0-‘)
Handset PIN code 0000
All Registered Base stations ERASED
3.8.2 Default Setting of the Base station
This procedure will reset all the parameters to default values and erase all
registered handsets.
Switch off the power (disconnect the adapter plug).
Press the Paging button and switch the power on again (connect the adapter
plug).
• Wait until you hear a beep tone.
The default values of the base station are reset now. You have 30 seconds time
to register a handset.
Default Parameter Values
Ringer Pattern 4
Ringer Volume 2 (middle)
Pause Time 1 (3 sec)
PSIC/EIC code ERASED
Emergency Call Memories ERASED
Call Lock Number Memories ERASED
Call Lock OFF
System PIN code 0000
All Registered Base stations ERASED
4 Technical Data
Frequency range 1.88-1.9Ghz (BW = 20 MHz)
RF Channels 10 Channel
Channel Band width 1.728 MHz
Modulation GFSK
Output power about 250mW
Antenna Diversity supported at base station
Data Transmission Rate 1.152 Mbps
Speech Encoding ADPCM (32 Kbps)
Communication Range about 100 meters in open space
Voltage stream supply Base unit: adaptor
Input: AC 230V ± 10%, 50Hz
Output: DC 9 V 350 mA / AC 9 V 260 mA
Handset: Ni-Cd Battery (AA, 2.4V, 650mAh)
Operating time Standby: 60 hours
Talk: 6 hours
Operating temperature 0°C to 40°C
Storage temperature -20°C to 60°C