68
3.6 REGISTRATION and DEREGISTRATION3.6.1 Registration
A new handset can be re g i s t e red to the base-station.
B a s e - s t a t i o n
•P ress the Paging Button until you hear the registration tone
• You hear the registration tone for about 30 seconds. During this period you
can register the handset.
H a n d s e t
• Switch off the handset (Press and hold the ‘ ’button for more than 1 sec.).
•P ress the ‘ ’ button with the desired base Number (1-4).
• The handset supports a base PIN code of max. 8 digits, depending on the base
s t a t i o n .
•P ress the‘ ’button and ‘1’ at the
same time.
• Enter the base PIN code (default ‘0 0 0 0’) and
then press the ‘#’ button.
• Wait until the allowed handset numbers are
d i s p l a y e d .
• Select the desired handset number.
When the registration pro c e d u re is finished,
the base and handset number appear on the
display if this is pro g r a m m e d .
3.6.2 Dere g i s t r a t i o n
A handset can be deleted from the base unit to which it is re g i s t e red. This function is
used when you have for ex. a damaged handset. The damaged handset will then be
deleted so that it can be replaced by a new one.
•P ress the buttons ‘ ’ and ‘#’ .
You will hear a confirmation tone coming
f rom the handset.
•P ress the buttons ‘9’, ‘0’ and ‘0’ .
• Enter the base PIN code (default ‘0 0 0 0’ ) .
On the display appear the handset numbers
of the handsets that are currently re g i s t e red
to the base station.
• Select the handset number that you
want to dere g i s t e r.
- 1 - 0 0 0 0 0 0 0 0
- 1 -1 2 3 4 5 6
INT
INT
900 ----INT
1 2 3 4 5 6 - 1 - H1