26 ServiceSearch
mighthave to fill in the correct LNB frequency. The absolute
differencebetween a broadcasting frequency and its LNB fre-
quencymust be within 950 to 2150 MHz. Forexample, if the
frequencyband of your desired satellite ranges from 3660 to
4118MHz, you have to set the LNB Frequency option to 5150
MHz.
TheLNB has to be supplied with electric power to operate. Set
theLNB Power option to On if it does not have any other power
supply.
Youhad better ignore the 22 kHz option.
Thedigital receiver is designed to be compatible with DiSEqC
(Digital Satellite Equipment Control)switches. It is possible
toconnect several antennas to one digital receiver by DiSEqC
switches. A DiSEqC 1.0 switch allows switching between up to
foursatellite sources and a DiSEqc 1.1 switch allows switching
betweenup to 16 satellite sources.
Setthe DiSEqC 1.0 option and the DiSEqC 1.1option accord-
ingto your antenna configuration.
Forexample, to select the antenna con-
nectedto the A5 input in the left figure,
setthe DiSEqC 1.1 option to 2 of 4 and
theDiSEqC 1.0 option to 1 of 4.If you
havea mini DiSEqC 1.0 switch which
hasonly two inputs, you should set the
DiSEqC 1.0 option to Mini A instead of
1of 4.
4.1.2 Configuring DiSEqC 1.2 settings
Yourmotorized antenna will turn toward your desiredsatellites
horizontallyby DiSEqC 1.2.