30 Service Search
1.Choose your desired satellite at the Satellite Name op- tion.
2.Set the Search Mode option to Auto.
3.If you set the Network Search option to On, the digital receiver will check up the
Searching every service of a transponder
To search every service of a transponder, perform the following steps:
1.Choose your desired satellite at the Satellite Name op- tion.
2.Set the Search Mode option to Manual.
3.Choose your desired transponder at the Frequency op- tion or enter it with the numeric buttons.
4.Enter the symbol rate of your desired transponder to the Symbol Rate option with the numeric buttons.
5.Set the Polarization option to the polarization of your desired transponder.
6.If you set the Network Search option to On, the digital receiver will check up the
NOTE
You may get transponder information from a satellite magazine or web site such as http://www.satcodx.com or http://www. lyngsat.com.
Searching one service of a transponder
To search one service of a transponder, perform the following steps:
