28 ServiceSearch
5.
Finallyset the Motor Control option to Store to save the
tunedposition when the receiving quality is best
There aremore motor control options for installers, but this
guidedoes not describe them. Ifyou are an installer, refer them
tothe manual about the STAB rotor.
4.1.3 Configuring USALS settings
USALS(Universal Satellite Automatic Location System), also
knownas DiSEqC 1.3, calculates the positions of all available
satellitesfrom your location. Comparedto DiSEqC 1.2, it is no
longer requiredto manually search and store every satellite
position. Just pointing to a known satellite position is enough.
Thisposition will act as a central point. TheUSALS will then
calculatepositions of visible satellites.
Touse the USALS protocol, se-
lect the Installation
>
USALS
Setting menu. You should see
ascreen like the left figure.
At first you have to set the Mo-
torized DiSEqC 1.3 option to En-
able.
Toget every satellite position calculated, perform the following
steps:
1.
Choose your desiredsatellite at the Satellite Name op-
tion.
2.
Enteryour location to the My Longitude option and the
MyLatitude option with the , andnumeric buttons.
3.
Enterthe position of your selected satellite to the Satellite
Angleoption if it is not correct.