2.2Safety precautions 9
• The mains power must be 90 to 250 volt. Checkit before
connectingthe digital receiver to the wall outlet. Forthe
power consumption of the digital receiver, referto Ta-
ble2.1.
• The wall outlet should be near the equipment. Do not
runan extention lead to the unit.
• Do not expose the digital receiver to any moisture. The
digitalreceiver is designed for use indoors only. Use dry
clothwhen cleaning the digital receiver.
• Place the digital receiver on a firm and level surface.
• Do not place the digital receiver close to heat emitting
units or in direct sunlight, as this will impair cooling.
Do not lay any objects such as magazines on the digital
receiver. When placed in a cabinet, make sure there is
a minimum space of 10 centimeters around it. For the
physical specification of the digital receiver,refer to Ta-
ble2.2.
• Protectthe power cord frombeing walked on or pinched.
Ifwires are exposed or cord is damaged, do not use the
receiverand get cord replaced.
• Never open the digital receiver casing under any cir-
cumstances. Warrantywill be void.
• Refer all servicing to a qualified service technician.
Table2.1: Power specification
Inputvoltage 90to 250 V AC,50/60 Hz
Powerconsumption 25W at maximum in operation
8W in standby