12 Setup
2.4 Connecting up your digital receiver
There are several ways to set up the digital receiver. Set up
thedigital receiver suitably to your television and other appli-
ances. Ifyou have any problem with your setup or need help,
contactyour dealer.

2.4.1 Connectingto the antenna

Whateversort of connection you have between the digital re-
ceiver and the television, you need to connect the digital re-
ceiver to your television antenna so that it can receivedigital
televisionservices.
Connect the antenna cable to the ANT 1
socket on the back panel of the digital re-
ceiver.
However your digital receiver is connected
tothe television, you must ensure that there
is a connection to both the ANT 1 and ANT
2connectorson your digital receiver, so that
bothtuners work properly.
Normally you do that by using a loop cable to link from the
RFLOOP 1 OUT connector to the ANT 2 connector.
NOTE
However,if you are in a weak signal area, or are using a signal
amplifierwith more than one output, you may achieve better
resultsby connecting a cable from the antenna or amplifier di-
rectlyto the ANT 2 connector rather than using the loop cable.
Ifyou have another digital receiver, link it from the RF LOOP
2OUT connector.

2.4.2 Connectingto your television

Between all the following connectors of your digital receiver,
we recommendyou use the first connector to get best picture