Topfield v2.0 manual for this series-link

v2.0 user guide	Page 6
[REC]:	If the programme currently selected in the grid has a series-link
	recording, pressing [REC] enters the Edit Pattern screen (see below)
	for this series-link.
	If that’s not the case and the currently selected programme has a
	recording, pressing [REC] tries to turn this into a series-link
	recording.
	If that’s not the case and the currently selected programme has a
	watch timer, pressing [REC] turns this into a ‘Recording’ timer.
	If that’s not the case then pressing [REC] creates a Recording timer
	for the currently selected programme.
	Note that it is only possible to set two simultaneous recordings. If you
	try to set a third recording at the same time as two existing timers,
	you will be warned of the clash in a popup – press any key to
	continue.
[WHITE]:	As [REC], except that in the last instance a Watch timer is created
	rather than a Recording timer.
[PAUSE]:	If the currently selected programme has a recording, enter the
	recording edit screen for it.
[STOP]:	If the programme currently selected in the grid has a recording, a
	watch timer or a series-link, you will be asked if you really want to
	delete it: pressing the [YELLOW] key will confirm this, causing the
	recording to be deleted. If the recording was part of a series link, other
	recordings on the same pattern will remain; recording of future
	editions of the episode just deleted will be inhibited by the fact that
	you’ve just deleted this one – iGuide keeps a record of deletions, and
	assumes that a deleted episode is definitely not wanted. If you want to
	record a future edition of the episode, you will need to either manually
	set a recording for it, or ‘refresh’ the series link pattern (see below).
[INFO]:	Show full information for the currently selected programme in a
	popup window; press any key to exit the window.
[SLOW]:	Toggle between EPG grid mode and single-channel per page mode.
[PLAY]:	Exit the screen and tune to the currently selected channel.
[RECALL]:	Repopulate EPG information for the currently selected channel.
[TEXT]:	Start a search. Pressing [TEXT] opens a prompt which asks for a
	series of comma-delimited search terms to be typed in, using the
	standard editing keys in Edit Mode (see below)
	Press [BLUE] to toggle between just searching programme titles and
	searching both titles and descriptions; press [FFW] or [REW] to cycle
	through the genre list, to enable search by a particular genre.