Toro 212 manual Setting An Interval Schedule

Setting An Interval Schedule

Turn the control dial to the WATERING DAYS position.

Check the PROGRAMS switch setting. If necessary, reposition the switch to select the desired program.

The current watering schedule will be displayed. If Int (Interval) is not displayed, press the +/ON or

–/OFFbutton as needed to select Int.

Press the NEXT button. The current Interval number (1–7) will begin flashing. The day of the week on which the Interval will start will be shown.

To change the Interval number, press the +/ON or

–/OFFbutton until the desired number is flashing.

Press the NEXT button. The Interval start day will begin flashing.

To change the Interval start day, press the +/ON button or the –/OFFbutton until the desired day is flashing.

8.To set an Interval schedule for another program, repeat all of the steps beginning at step .

3		2
	PGM	A
9	3
	MO
6	7	4	5	3	5	7
1
						4	6
			2	3	5	7

When you have completed setting the Interval schedule for each program (as needed) return the control dial to the RUN position.

18