Toro 212 manual Setting Station Run Times

Setting Station Run Times

Turn the control dial to the STATION TIMES position.

Check the PROGRAMS switch setting. If necessary, reposition the switch to select the desired program.

Station number 1 will be flashing and its current run time or OFF will be shown. To select a different sta- tion number, press the +/ON or –/OFFbutton until the desired station number is flashing.

Press the NEXT button. The run time (or OFF) will begin flashing.

To set the run time, press the +/ON or –/OFFbutton until the desired run time is shown.

Note: To remove the run time, select OFF by press- ing the +/ON and–/OFFbuttons at the same time.

Press the NEXT button. The next station number will begin flashing.

7.Repeat steps and as needed to set, change, or remove the run time for the remaining stations.

8.To set the station run time for another program, repeat all of the steps starting at step .

Return the control dial to the RUN position.

					2	4	5
				PGM		A
9	1 2	3	4	5	6
	3						3	5
								4	5
	1					2	3	5

21