Toro 212 manual Setting An Odd or Even Schedule, Turning Off A Program

Setting An Odd or Even Schedule

Note:The Odd/Even Selector Jumper must be removed this type of watering schedule. See page 14 for details.

Turn the control dial to the WATERING DAYS position.

Check the PROGRAMS switch setting. If necessary, reposition the switch to select the desired program.

The current watering schedule will be displayed. If Odd or Even is not displayed, press the +/ON or

–/OFFbutton as needed to select Odd or Even.

Note: When Odd is selected, the 31st day of the month and the 29th day of a leap year will not be active watering days.

4.To set an Odd or Even schedule for another program, repeat steps and as needed.

When you have completed setting the Odd or Even schedule for each program as needed, return the control dial to the RUN position.

3	2
PGM	B
5
		3
1
	2	3

Turning Off A Program

Note: Turning off a program does not alter or erase a preset watering day schedule. Selecting Off simply places the program on hold until one of the watering day schedules is selected.

Turn the control dial to the WATERING DAYS position.

Check the PROGRAMs switch setting. If necessary, reposition the switch to select the desired program.

Press the +/ON or –/OFFbutton until OFF is flashing.

4.To turn another program Off, repeat steps and

as needed.

Return the control dial to the RUN position.

3	2
PGM	C
5
		3
1
	2	3

19