Watering Control Features
The following watering control features enable you to fur- ther control the watering program during operation.
All watering control features apply to watering programs started manually and automatically.
To Pause Watering
Press the +/ON and –/OFF buttons at the same time.
•The station currently watering will shut off.
•The “Watering On” symbol will begin flashing.
•The display will show the amount of run time remain- ing for the paused station.
Note: If watering is not resumed within 8 minutes, all watering operations will be canceled and the con- troller will return to the automatic mode.
To Cancel Watering
Press the +/ON and
two times.
•All watering operations will be canceled and the con- troller will return to the automatic mode.
Note: Placing the control dial in the OFF position for two seconds, then back to RUN will also cancel all watering operations.
To Skip Stations
Press the NEXT button one time.
•The station currently watering will shut off and the next station will start.
•If the last station is skipped, the program will end. If additional programs have been set to operate the next program in alphabetical order will start.
To Resume Watering (when paused)
Press the NEXT button.
•Watering activity will resume from the point of inter- ruption.
To Adjust The Station Run Time
Press the +/ON button to increase run time or the
•If the station run time is decreased to less than
1 minute, the station will shut off. The next station in sequence will start.
•The station run time is changed during this operation only. The program memory will not be changed.
28