22
Warning (cont’d)
Warning | Display State |
Battery
Over Heat
Input Under Voltage (see note 1)
Input Over
Voltage
(see note 1)
LED State | Alarm State | Description and Resolution |
Warning/Fault ... Flash | Alarm will | This warning can be caused by | |
Battery .............. Flash | sound for | the same conditions listed for | |
| ambient overheat. Another | ||
| possible cause would be a | ||
| at 15- | ||
| problem with the battery module, | ||
| second | ||
| which could prevent the unit | ||
| intervals. | ||
| from providing backup power. | ||
|
| ||
Warning/Fault ... Flash | Alarm will | This warning will occur if the input | |
20% .................. Flash | sound for | voltage drops below the minimum | |
allowable voltage. If the unit was | |||
| 1/2- | ||
| online when the warning occurred it will | ||
| second at | transfer to battery backup. After the | |
| 10- | backup the output will shutdown. If the | |
| unit was in bypass the output will be | ||
| second | ||
| turned off. The unit will reinitialize the | ||
| intervals. | startup sequence if input power returns | |
|
| to within specified limits. | |
Warning/Fault ... Flash | Alarm will | This warning will occur if the input | |
40% .................. Flash | sound for | voltage exceeds the maximum | |
allowable voltage. If the unit was | |||
| 2, 1/2- | ||
| online when the warning occurred it will | ||
| second | transfer to battery backup (see note 2). | |
| beeps at | If the unit was in bypass the output will | |
| be turned off. The unit will return to | ||
| 10- | ||
| normal operation if input power returns | ||
| second | to within specified limits. | |
| intervals. |
|
