103
This mode is used when the line is used for both facsimile and telephone.
The facsimile automatically determines whether an incoming call is for facsimile or telephone. When
the call is for telephone, the ringer will ring according to the value set for the call time. When the call
is for facsimile, the machine will automatically start receiving the document.
If the other party is sending a document, the facsimile automatically receives the document. If the
other party is making a phone call, the facsimile goes on to generate a pseudo-rings.
(1) Caller in Automatic Facsimile Transmission Mode
Detects the facsimile signal and the facsimile will engage Auto Reception mode.
(2) Caller in Manual Facsimile Transmission Mode
If you pick up the handset of the external telephone during the Pseudo Ringer period, you can
talk with the caller, then press
START
to start receiving a document. When the Pseudo Ringer
period ends (because no one answers), the facsimile is automatically switched to Facsimile Re-
ception mode. In this mode, the remote party can manually send a document as well.
(3) Caller Attempting a Phone Call
You can talk with the caller if you pick up the handset of the external telephone during the
Pseudo Ringer period. When using a connected external telephone, you must press
STOP
to
talk with the caller.
“MANUAL RECEIVE” allows you to use the facsimile as a tele-
phone (talking function) first and then start a document reception
by pressing:
START
1. When the facsimile rings, pick up the handset and talk with
the remote party.
2. If you hear the facsimile tone through the handset instead of
an operator’s voice, you may manually initiate a facsimile re-
ception by pressing:
START
3. Replace the handset to the cradle. The facsimile will start re-
ceiving the document.
TEL/FAX Auto Switching Mode Manual Receiving Mode