27
Hold the Front Cover by the
grips on both sides of its upper
part and pull it down to open it.
NOTE:
Do not pull the Front Cover
too strongly when opening
it.
NOTE:
Do not touch the Develop-
ment Roller of the Toner
Cartridge. The image quality
could be degraded.
Open the Front
Cover
1
Drum Unit and Toner Cartridge Installation
Mix the Toner by shaking the
Toner Cartridge back and forth.
NOTE:
Avoid touching the toner to
your clothing since toner
cannot be removed easily.
If the toner sticks to your
clothing, immediately rinse
out the toner with cold wa-
ter.

Prepare a Toner

Cartridge

2
Match the colored parts in the
lower area of the Drum Unit
with the same colored parts in
the lower area of the Toner Car-
tridge.
NOTES:
• Keep the Toner Cartridge
level with the Drum Unit
when they are detached.
• Do not touch the PC Drum
under the lid of the Drum
Unit. The image quality
could be degraded.
• Do not touch the metal area
of the Toner Cartridge. It
could be damaged due to
electrostatic interference.

Attach the Toner

Cartridge to the

Drum Unit

4
IMPORTANT:
When you use a toner cartridge
of our recommendation, the
facsimile machine can detect
whether or not the cartridge is
inserted in the machine and
alert the user when the amount
of toner is low or needs replac-
ing. As the facsimile machine
does not start printing when the
toner is not inserted or when
the amount of toner is insuffi-
cient, loss of received data can
be prevented. If a toner car-
tridge other than that of our rec-
ommendation is used, the ma-
chine may not be able to detect
whether the toner cartridge has
been inserted or if the toner
amount is sufficient, and print-
ing is not possible using the
default setting.
If you want to use a toner car-
tridge other than that of our rec-
ommendation, please inform
our service center. The service
center will change the machine
setting to cancel the detection
function. Please note, however,
that when the setting is so
changed, the machine will start
printing even if a toner cartridge
is not inserted or the toner
amount is insufficient. Conse-
quently, the printout may not
be satisfactory and the re-
ceived data may be lost.

Remove the protective

cover from the Toner

Cartridge

3