172
This operation is used to re-
send a document after the doc-
ument initially failed to be sent.
If recovery transmission is set
to ON, the document is stored
in the e-STUDIO170F for re-
sending.
NOTES:
• When the Recovery Trans-
mission is set to OFF, an
error tone and “NOT AL-
LOWED NOW” LCD
prompt result when Recov-
ery Transmission is se-
lected.
If there is no document
stored for recovery trans-
mission, an error tone
sounds and “NO ENTRY”
LCD prompt will be dis-
played.
• To change the default set-
ting of this function, refer
to page 145. The status
selection in this operation
will take precedence over
the default setting.
Press:
+
+
+
+
Enter the new facsimile num-
ber.
Sending Recovery Transmission
Select the Desired

Job

2

Change the

Facsimile Number

3
Display the

RECOVERY

TRANSMIT Menu

1
To start the transmission,
press:
Press:

Cancel the

Document

4
RECOVERY TX
[ENTER]:START
FILE NBR = 005
12345
2.CHANGE
JOB NUMBER 005
1.START
FAX NUMBER (MAX128)
[12345 ]
To cancel the document, go to
Step 4.
Press
MENU
or to
view the jobs stored for resend-
ing. The information is dis-
played on the LCD display.
MENU
When the sending document to
be recovered was sent using
the One Touch key, Abbrevi-
ated Dial Number, Group Num-
ber, or Alphabet Dialing, press:
You can also change the num-
ber of the remote facsimile if
dialed from the Dial Keypad.
To re-transmit the document or
change the facsimile number,
press .
To change the number, press:
The transmission starts imme-
diately if the phone line is
available.
The transmission starts imme-
diately if the phone line is
available.
If the correct number is en-
tered, press:
JOB CANCEL
2.NO
DELETE JOB NUMBER005
1.YES