Chapter 5: Setting up your TV

28
Setting the HDMI® audio mode

To set the HDMI® audio mode:

1
Press and open the Sound menu.
2
Highlight Audio Setup and press .
3
Press S or T to select HDMI 1 Audio and
then press W or X to select the HDMI 1 audio
mode (Auto, Digital, or Analog). (Auto is the
recommended mode.) See “Connecting an HDMI
or DVI device to the HDMI® input” (page 17).
Mode Description
Auto
When viewing the HDMI 1 input, if
digital audio from the HDMI input is
available, it will be output. If not, the
TV will automatically detect and output
analog audio from the PC Audio input.
Digital
When viewing the HDMI 1 input,
digital audio from the HDMI input will
be output.
Analog
When viewing the HDMI 1 input,
analog audio from the PC Audio input
will be output.
4
To save your settings, highlight Done and press
.
Note: Because the PC and HDMI1 inputs share
the same set of analog audio inputs, the PC
Audio menu setting influences the HDMI 1
Audio menu setting. If PC Audio is set to “No”
the HDMI 1 Audio setting changes to “Auto”.
If PC Audio is set to “Yes” the HDMI 1 Audio
setting is set to “Digital” and is grayed out in
the menu. (Also see item 3 on page 13 and
“Setting the PC Audio” on page 45.)

To manually add digital subchannels on a

physical channel:

Use the Channel Numbers and the Dash ( ) on
the remote control to enter the channel number (for
example, 56–1).
If the channel is found, the number will be added to
the list and the box will be unchecked.
If the channel is not found, a message will appear.
Note: Skipped channels cannot be selected
with or ; however, they can still be
accessed using the number keys on the remote
control.

To remove encrypted channels from the

channel memory:

If an encrypted channel is accidentally added to the
channel list by programming channels, you can remove
the unwanted encrypted (non-viewable) channel while
you are channel surfing. When you tunes to an encrypted
channel, the following message will appear.
Digital Channel Is Encrypted - Press 1 on remote to remove channel
Press while the message is on the screen to remove
the unnecessary channel from the channel list.