Toshiba 2405 Satellite 2400 Series Disassembly Overview, cont, Toshiba TRR, Page, 7/02, Satellite

Satellite 2400 Series Disassembly Overview, cont.

To remove the DC-IN cable, follow the steps below.

1. Remove two M2.5x6 black flat-head screws securing the plastic brace.

2. Remove the plastic brace.

3. Disconnect the DC-IN cable from PJ8800 on the system board.

4. Remove the DC-IN cable.

!

!

To remove the cooling fan, follow the steps below.

1.Remove two M2x6 screws securing the metal brace.

2.Remove the metal brace.

3.Disconnect the power cable from PJ8770 (S2400) or PJ770 (S1400) on the system board.

4.Remove one M2.5x4 black flat-head screw securing the cooling fan module.

5.Remove the cooling fan module.

6.Remove the heat sink unit, if necessary.

"

To remove the system board, follow the steps below.

1. Remove three M2.5x6 black flat-head screws securing the system board.

2. Remove the following two stud screws:

• One M2.5x6

• One M2.5x14

3. Lift up the system board from the right side and remove it with the RJ-45 jack.

!

Toshiba TRR Page 19 7/02, Satellite