Toshiba 26HF86C, 30HF86C Locking channels, To change your password, Enter, To lock channels

SET :ENTER END :EXIT

:ADJUST

:CH 002

0 0 0

0 0 0

0 0 0

CH LOCK SET / CLEAR SETUP CH TV CABLE

5.You may now set up the LOCKS menu. See “Locking channels” (below), “Locking video inputs” (page 26), “Setting the GameTimerTM” (page 26) or “Using the front panel lock feature” (page 27.)

To change your password:

1.Press MENU, then press or to display the LOCKS menu.

2.Press ▲ or ▼ to display the password entering mode.

3.Use the Channel Number buttons (0-9) to enter your password. Press ENTER. The LOCKS menu appears.

4.Press ▲ or ▼ to highlight NEW PASSWORD and press or to display the NEW PASSWORD menu.

5.Use the Channel Number buttons (0-9) to enter a new code. Press

ENTER.

6.Enter the password again to confirm it, and then press ENTER.

7.Press EXIT to return to normal viewing.

Locking channels

With the CH LOCK feature, you can lock specific channels. You will not be able to tune locked channels unless you clear the setting. You can choose to lock up to nine TV channels and nine cable channels.

To lock channels:

1.Select a channel you want to lock.

2.Press MENU, then press or to display the LOCKS menu.

3.Press ▲ or ▼ to display the password entering mode.

4.Use the Channel Number buttons (0-9) to enter your password,

menu appears.LOCKCHVIDEGAMELCPASSWORDSOPANELTIMLOCKKOFF

5.Press ▲ or ▼ to highlight CH

LOCK and press or to display FRONTNEW:SELECT LOCK :ADJUST

the CH LOCK menu.

6.Press or to select the follow-then press ENTER. The LOCKS

ing:

•SET– to set the channel as one

to be locked. Then press ENTER.

• CLEAR– to clear all channels from

the list of locked channels. Then press ENTER.

7. Repeat steps 1 through 6 to lock other channels. When you are

finished locking channels, press EXIT to return to normal viewing. If you try to tune a locked channel, the TV will not display it, but will display the nearest unlocked channel.

Recall

Channel

Numbers

Channel 3 4

Menu/

Enter

Exit

Note:

If you forget your password, press RECALL four times within five seconds while the TV is in password entering mode. This allows you to reset your password.

Safeguards Important

ToshibaWelcome to

yourConnecting TV

Remote ControlUsing the

your TVSetting up

To unlock channels:

1.Press MENU, then press or to display the LOCKS menu.

2.Press ▲ or ▼ to display the password entering mode.

3.Use the Channel Number buttons (0-9) to enter your password, then press ENTER. The LOCKS menu appears.

4.Press ▲ or ▼ to highlight CH LOCK and press or to display the CH LOCK menu.

5.Press or to highlight CLEAR and clear all channels from the list of locked channels. Press ENTER.

6.Press EXIT to return to normal viewing.

Note:

After programming CH LOCK, change channels before turning off the television.

FeaturesUsing the TV’s

25

Appendix

J3S40421A(E)_P24-29 25 20/12/05, 2:35 PM