Toshiba 30HF86C, 26HF86C appendix Image tilt correction, Adding channels to the TV’s memory

Image tilt correction

When you install or change the direction of the TV, the picture may become tilted (caused by the Earth’s magnetism.) If this happens, use the image tilt correction feature to obtain the best possible picture.

To adjust the image tilt:

1.Press MENU, then press or until the SETUP menu appears.

2.Press ▲ or ▼ to highlight IMAGE TILT.

3.Press or to adjust the picture tilt (from –10 to 10.)

SETUP
CLOSED CAPTION	OFF
PICTURE SIZE
PICTURE SCROLL	VIDEO
CINEMA MODE
ASPECT	ON
IMAGE TILT	0
:SELECT	:ADJUST

Adding channels to the TV’s memory

When you press CH 3 or 4, your TV will stop only on the channels you have stored in the TV's channel memory. Follow the steps below to program channels into the channel memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory auto- matically, you can add or erase channels manually.

		To add channels automatically:
		1.	Press MENU, then press or to display the SETUP menu.
		2.	Press ▲ or ▼ until the TV/CABLE			LANGUAGE		ENGLISH
			selection is highlighted.			TV/	CABLE	TV/	C	ABLE
						CHPROGRAM
		3.	which you use.			ADD/ERASE		ADD
			Press	or	to highlight either	SETUP		12:00AM
			TV or CABLE, depending on			LOCKSET
			If you use an antenna, choose TV.			:SELECT		:ADJUST
			If you use cable, choose CABLE.
		4.	Press ▼ until the CH PROGRAM selection is highlighted.
		5.	Press	or	to start channel programming. The TV will automatically
			cycle through all the TV or Cable channels (depending on which you
			selected), and store all active channels in the channel memory.
			While the TV is cycling through the channels, the message
			“PROGRAMMING NOW-PLEASE WAIT” appears.
Settingup		6.	When channel programming is complete, the message “COMPLETED”
	yourTV		appears.
		7.	Press CH 3 or 4 to view the programmed channels.
		Adding and erasing channels manually

After you have programmed the channels automatically, you can add or erase specific channels manually.

To add or erase channels manually:

1.Select the channel you want to add or erase. If you are adding a

channel, you must select the channel

using the Channel Number buttons.

2.	Press MENU, then press or	to	S E T U P
			L A N G U A G E	ENGLISH
	display the SETUP menu.		CLOCK SET	12:00AM
3.	Press ▲ or ▼ to highlight ADD/		TV / CABLE	CABLE
			CH PROGRAM
			ADD / ERASE	ADD	/ ERASE
	ERASE.		:SELECT	:ADJUST
4.	Press or to select ADD or
	ERASE, whichever function you want to perform.
5.	Repeat steps 1-4 for other channels you want to add or erase.

22

Channel

Numbers

Channel 3 4

Menu

J3S40421A(E)_P16-23 22 20/12/05, 2:33 PM